Tractor backhoe loader vehicles, for instance, require compact construction supported centre mounting and troughs. Telescopic handler vehicles require a narrow, high silhouette with a little side boom overhang, or a coffee construction with lateral extensions, counting on the sort of design.
In addition, in most areas of use of construction machinery there's a requirement for a minimum of one power take-off, for instance for the hydraulics of working machines. the aim that the reverse transmission has got to meet is therefore very different counting on the wants of the structural sort of the vehicle. This requirement must be satisfied within the range of the axial design length and therefore the width of the transmission.
The first mentioned sort of transmission has different requirements for the position of the driven shafts and therefore the number of forward and reverse shift gears required.
For example, the compact tractor backhoe loader transmission has the need for a brief distance between the drive shaft and therefore the driven shaft (rear to the rear wheel), which depends on the position within the vehicle and its mounting space requirements. this suggests that the engine / transmission unit must be seated as high as possible. For tractor backhoe loaders, most rear wheels are clearly larger than the front wheels, in order that the vertical position of the rear axle is clearly above the vertical position of the front axle. the quality spacing thus determined is from 160 mm to 180 mm within the vertical direction with no transverse offset or with a small transverse offset.
A compact tractor backhoe attachment for sale is typically equipped with connectable front wheel drives, which are located deeper within the transmission compared to the follower heading towards the rear wheels, supported the smaller front wheels. Since the engine flange fastenings are located on the front side of the transmission.
留言