Click here for full-colour brochure

 

  • 12F / 12R Synchronized Transmission allows the operator to change speeds while moving without bringing the Branson tractors to a complete standstill and 
  • Both Forward / Reverse shifting is easily achieved wth Synchro Shuttle.
  • Hydrostatic Transmission including cruise control for 6225Ch has 3 varieties in variable speed by foot control to release hands for simple loader operation, even for amateur operators.
  • 6225C : Powerful Climate Controlled Cab (incorporating A/C and Heater, FM/AM Radio) always puts you at a pleasant temperature in any severe weather conditions.
  • 1,500kg rear hitch lift capability. Standard CAT I 3-Point Hitch gives all the lifting power you need for compact tractors of this size.
  • 2 speed independent PTO is fitted as standard which enables operators to switch to approx 584 or 1,088 RPM to operate compact tractor attachments more efficiently and with higher fuel efficiency.
  • A robust rear hitch lift capacity of 1,733kg. Conventional CAT II 3point Hitch enables Operators up to heavier compact tractor attachments.
  • Complied with a pair hydraulic pumps: 1 for the hydrostatic steering and another for the remainder of the hydraulics which means there is adequate pressure in the lines for all purposes ensuring safer, regulated steering and smooth, robust bucket operation.
  • Clutch locks fitted as standard equipment: They enable operators to lockout clutch discs, which will stop the clutch from sticking if the compact tractor is non-operational for lengthened periods.

6225 CH Branson Tractors UK Model

£22,106.00Price
  • Quick Specs

    • Power: 60HP
    • Transmission: Hydro
    • Platform: Cab with full AC
    • Auxillary double acting hydraullic services: 2 rear, 2 mid
    • PTO speeds: 540/750
    • 3 point linkage lift at ball ends: 1500kg
  • SPECIFICTION

    Engine HP (kW) @ Rated RPM: 55 (40.4) @ 2600

    PTO HP @ Rated RPM: 47.5

    Drive System: 4 Wheel Drive

    Max.Forward Speed (Km@RPM): 33.2 @ 2850

    Min.Forward Speed (Km@RPM): 1.835 @ 2850

    Engine

    • Main Shift: Hydrostatic
    • Reverse Method: Hydrostatic
    • Gear Shift: 3 Range
    • On-the-Go Shifting (Yes/ No/ Partial): No
    • Clutch: N / A

    Brake: Wet, Multidisc

    Fuel System: 35

    PTO: Rear PTO: 584 / 1088 RPM(Independent Type, CW, 6 Spline shaft)Front PTO: Attachable

    Hydraulics

    • Main (lpm): 39
    • Steering lpm(L/min): 19

    SCV Mid/ Rear: 4/ 4 (Detent)

    3-Point Hitch

    • Hitch Category: CAT I
    • Hitch Lift Capacity on Ball Ends (kg): 1500
    • Hitch Lift Capacity Measured 24” (610mm) Behind Ball Ends (kg): 1100
    • Control Type: Draft/ Position

    Steering

    • Category: Power Assisted Hydrostatic
    • Turning Degree: 56°
    • Adjustment: 3-Stage Tilt

    Electrics. Generator: 12V / 70Ah

    Tires: F : 9.5-16 / R : 13.6-26IND.: 10-16.5, 17.5L x 24

    Dimensions

    • Overall Length (mm) (Front weight - 3PL): 3511 (With Front Weight)
    • Overall Width (mm): 1650
    • Overall Height (mm): 2500
    • Wheelbase: 1806
    • Ground Clearance (mm): 399
    • Weight (kg): 1968

    Options: Front Weight (17kg x 6)

     

Contact us for more information
Address

Beckside Machinery

Beckside Farm

Caistor Road

Market Rasen

LN8 3SY

Beckside Machinery Ltd, registered as a limited company in England and Wales under company number: 09309022.

Registered Company Address: Beckside Farm, Caistor Road, Market Rasen, LN8 3SY.

© 2019. The content on this website is owned by us and our licensors. Do not copy any content (including images) without our consent.